Storm Sewer & Flood Modeling
Welcome to the Innovyze Stormwater, Sewer, and Flood modeling feedback page.
370 results found
-
Alert Action Repetition Control - repeat action after alert has been active for Xnr runs
We have a model set up to process the EA's flood alerts and send out warnings when new ones become active. The model runs every 30 minutes, so we pick up the latest alerts and the repetition control is set to once so people don't become drowned in alerts. I would like to be able, if the EA alert was still active, to repeat this alert 24 hours later - so maybe have an additional repetition control column to repeat the alert after Xnr model runs. So in this case 48 runs would give me my daily repeat of the…
5 votes -
Allow pollutographs to apply on subcatchments
At the moment it is not possible to set a pollutograph for subcatchments, and the modeller is obliged first to run the hydrology, export the hydrograph, re-import the hydrograph as inflow, and finally re-run with a pollutograph
5 votes -
Import ISYBAU networking into InfoWorks
Read ISYBAU data into InfoWorks
5 votes -
Slot Width field for 1D conduits
Could the Slot Width field be enabled for Conduit Type "Conduit" and results generated by the application of the numerical correction tool been stored there for greater clarity, thanks.
4 votesThanks for the idea!
The slot width field is used to define the width of the drain when using a 2D conduit. Are you after a field to define preissmann slot?
-
Order ARR19 Box and Whisker plots by duration
The box and whisker plot outputs order alphabetically. It would be useful if it ordered based on rainfall event duration instead.
4 votes -
Built-in mapping capabilities, like PCSWMM and Civil 3D have
Other software has built-in background mapping capabilities for free, using OpenStreetMaps or Bing satellite/hybrid road maps for georeferenced models. The current capability of supporting WMS servers falls way too short and there are no free options available anymore.
This should have been included ages ago.
4 votes -
Faster release Exchange license
After a user uses the Exchange license, it takes ages before the license is released again so another user can use it.
4 votes -
odour
Air Phase Model Function - Can Innovyze consider to include air phase modelling function in InfoWorks? At moment, the odour modelling is done separately by various methods using the sewer hydraulic data as the input. As a result, the odour modelling has to be done by different teams and often costing. There is a strong market demand to integrate the liquid and air phase modelling, for example DHI already has a function. It is technically challenging to have a full integration, however there are well developed simplified ways to achieve that.
4 votes -
adjustments to a selected set of scenario's
In my opinion it would be very useful if you could make the same adjustments in one stretch for a selected set of scenario's. Similar to an adjustement you make in the base scenario that effects all the underlaying scenario's but than for a specific selection of scenario's. It would be handy to restore an error that occurs in several scenario's (scenario' that are all a copy from the same scenario)
4 votes -
Split a subcatchment
To be able to easily split a subcatchment into 2 separate subcatchments.
For example when it becomes obvious that the flow from a subcatchment cannot be collected at a pit (node), it becomes necessary to insert an additional pit (node) to capture flows. The subcatchment needs to be easily split (say with a general line) into 2 separate subcatchments with similar data other than the new areas.
4 votes -
Export river cross sections for an ICM model
At present, ICM river cross sections can only be exported to dwg one by one. It would be helpful to be able to export all the modelled cross sections in a single operation (eg via data export centre)
4 votes -
ICM - Statistics Template: Daily events
I want to be able to break my events into daily values. Currently this would require setting up 7 separate templates each with the unique day set under the 'Time Window' button. I want a tick option added that will allow me to do this within the single template.
4 votes -
ICM Status bar to show more significant figures
The status bar currently only displays levels (ground model level, water depth) to 1 decimal place. 2 Decimal places would be much more useful, Especially to ensure a node is at a low point or in the gutter invert..
4 votesThanks for the additional information and good idea!
-
SQL in run dialog box to select gauged objects
Using SQL to select gauged objects would allow their dynamic selection based on object properties, not just from a static list. This is an issue when testing scenarios if field names are added/changed. It is further compounded by selection lists becoming read-only after being used in a simulation, prompting a proliferation of duplicate selection list objects to update the list.
4 votes -
Detention Time Modelling
We would like the model to calculate detention time of sewer in a simulation. The idea is similar to water age calculation in WS. The aim is to use this as a proxy for odour study, in essence we would like to be able to create thematic maps to show where sewer is older, where it gets diluted with fresh, non-pumped, sewer and so on
4 votes -
As an organisation we would like to export the data exposed in show details view
As an organisation we would like to export the data exposed in show details view in order to assist with reporting in relation disc storage/ utilisation i.e. ID associated with Model Group.
We store all our DAP models within a single Db so collecting manually is time consuming4 votes -
ICM sims updated with better control on sims outcome
I think waiting a big time for a sim to be done and then because the sim results disk gets full, loosing all of the simulated data is something that should be prevented from the time someone sends the simulation. A warning should be issued when you send the sim, looking at the remaining free disk size, Also maybe showing a estimation of how much space you will need.
4 votes -
Enhance import/export of SWMM models for ICM platform
Enhance model import from SWMM5 INP files to include a few of the Open Data Import Center /Open Data Export Center options:
• Only update existing records
• Ignore existing objects
• Overwrite, Merge, etc.
• Export Selection only
Ultimately we want to have a central model copy but have the ability to easily push out and in simple EPASWMM INP files for developers and others. When a new SWMM INP file comes back from another modeler, we’d like a good way to update the existing model from that.
It would be great if this applied to both SWMM and…4 votesAs each INP is a set of physical conditions and event data, the Open Data Import Center imports only the physical network objects.
-
Enable remote simulations with state files without local agent being active
When running (very) long time series, we often split up simulations in shorter blocks and link them via final/initial states (mainly to prevent total loss of results in case something happens near the end of the simulation, and to make results more manageable). However, when we schedule such a "chain of simulations" to remote server and also have the results stored remotely, the chain is still interrupted as soon as the local agent from where they were launched is stopped (e.g. because the local pc is shutdown). As the whole chain can take days or weeks to run, this is…
4 votes -
Collapsing walls identified in the log file
Can we have the status of base linear structures included in the log file? I have a large model where I have lots of these and I need to interrogate each one in turn. It would be much easier if the log file (or, better still, a grid view) showed the status of each wall.
4 votes
