Storm Sewer & Flood Modeling
Welcome to the Innovyze Stormwater, Sewer, and Flood modeling feedback page.
55 results found
-
User URL for X/Y Coordinates
Currently, the User URL option for the "View Online" menu in Innovyze ICM only allows for the output of longitude and latitude coordinates. Our GIS system is built on the BNG projection and therefore uses X/Y coordinates in its URL. Can you enable X/Y coordinates to be used in the User URL generated by ICM?
5 votes -
Can the simulation log file be broken up into sections
Can the simulation log file be broken up into sections, as models get bigger and many with several 2d zone trying to find what is actual causing a simulations failure is becoming a bit more difficult having to scroll through big log files for that one line of information. Im thinking a summary sheet on why sim failed, along with a 1d, 2d possible river as well. Would help you look for issues.
3 votes -
Allow user to set number format in ICM grid windows
It would be great if a user could set number formats in InfoWorks ICM grid windows. For example, we are calibrating a large diameter pipeline by adjusting Manning's n values. We are using 5 digits after the decimal place, but ICM only shows 4 digits. When I copy from the grid, it only copies 4 digits after the decimal. So I have to use a csv export to see the actual values. Or at least set Manning's n values to 5 digits after the decimal place.
7 votes -
Sim Slots
There should be an option to select to limit sim slots to be used by a model so other models dont go in waiting when running sims simulataneously .
9 votesHello there,
If my understanding of the request is correct then I believe that this capability does already exist in the agent options. If you are able to start the InfoWorks ICM agent manager, then here it is possible to set a maximum number of concurrent simulations which can be active at any one time.
Thanks,
Pascal -
Ability to access databases where Workgroup Data Server and databases don't reside on same server
With the large amounts of data generated it would be beneficial if a supported configuration would be to have a WDS installed on a server but pointing at databases (and solves etc) over the network on a remote storage system (such as NAS). This would make the whole solution far more scalable as the need arose.
8 votes -
Have multiple Workgroup Data Servers
I want to be able to segregate databases between different parts of the business so they only have visibility of, and access those specific to them. Having the ability to install multiple WDS on a single server makes sense from a cost/configuration/data segregation perspective but currently this isn't possible.
8 votes -
UNDO Button
We all make mistakes!
9 votes -
Use of cfg for mapping in Polygon Generation via Intersection or have a Ruby do it
In doing (and often multiple redoing) the Polygon Generation via Intersection, it would be very useful to have the opportunity to save the mapping (which GIS or Network Field in which Polygon field) in a cfg file, like the ODEC feature has the opportunity to save the mapping.
As an alternative it would also be very useful to be able to run a Ruby which activates the Polygon Generation via Intersection and even the Area Take Off features.3 votes -
Set database management permissions
(Workgroup) database permissions are now mainly used to prevent users from modifying content within the database, but there is currently no way to prevent them from updating databases, creating new ones unlimitedly on servers with otherwise protected access etc. It would therefore be useful to have an additional security level which deals with database management permissions.
3 votesThank you for this request.
There are already settings available for database creation permissions which can be implemented using the snumbat.ini file.
Specifically there is a keyword “AllowDatabaseCreation” where a setting of 0 means creation is disallowed and a settings of 1 means creation is allowed. The Workgroup Data Server Administration document which can be requested from Innovyze talks through these steps and provides examples for the snumbat.ini files.
When it comes to the updating of databases, is this to restrict the ability to update from a particular software version database to a later one or rather to prevent update to the contents of the database please?
Thanks,
Pascal -
One more File name format for ASCII Grid (forecast) in Spatial TSDB
Now the file name format like *YYYYMMDDHHhhhmm of ASCII grid (forecast) can be supported in Spatial TSDB. However, if the user has a forecast origin accurate to minute, it cannot be used. A new file name format of *YYYYMMDDHHMMhhhmm should be included.
2 votes -
On behave of Chinese users, could developing team transfer drainage design module from infoSwmm into ICM?
On behave of Chinese users, could developing team transfer drainage design module from infoSwmm into ICM?
Clients in China do have this wish to do drainage and model in same software. Many of our potential client choose Hongye (a simple drainage modelling software) instead of ICM only because Hongye could do pipe design work.2 votesThanks for raising this request on User Voice. For the drainage design requirements across the globe at a localised scale we have InfoDrainage, when looking to take a design which has been produced and to then understand the more holistic catchment wide impact of such a design, this is where the model can be imported into InfoWorks ICM for integration. It is probably worth exploring this in more detail in this instance to understand exactly what the end goal the client is after and at what scale the work is being completed if that would be possible.
-
'Find and Replace Flags' tool on multiple networks.
As a large organisation with multiple users of InfoWorks ICM we have a set up with one masterdatabase and everyone using groups off this in order to keep all users on the same version. The downside is, that as users import previous models more flags get added, which are now obsolete in our current specification leading to hundreds of flags in the masterdatabase. It is not practicable to use the find and replace flags tool on each network individually, if this feature was expanded to be able to use on multiple networks, it would make administering our model flags much…
21 votes -
Hyperlinks to specific pages not just files/documents
When adding hyperlinks to features within the properties, enable the ability to link to a specific page within the document itself rather than just a folder location or document opening on the first page.
1 vote -
4 votes
-
Removing missing GIS-layers
If a GIS-layer for a model is missing you cannot remove the reference to it because the layer isn't visible in the GIS layer control window. So you keep getting the error message each time you open the model. Why not make missing GIS-layers visible in the GIS layer control window ('greyed out' or with a suffix '(missing)' in the description). Then you can select it and remove it.
9 votes -
Interpolation of levels
It happens too often that while merging different models, you suddenly need a different timestep for your level-file. The only way to do this now, is remake your level completely. It would be better to (when changing the timestep of your level) ICM would ask what do : automatically interpolate the new in between time steps, put the in between time steps on zero,...
7 votes -
Realign Feature Tool
For XPSWMM and Infoworks (any GUI editor you have actually):
Moving an existing line substantially is something that occasionally happens. If we could do this without having to delete the entire thing, or click and drag each vertex one at a time, it would be a big help at times.
A new feature I’d like to see for lines/polygons is a ‘realign feature’ tool. When selected, if you clicked on a vertex in a line or on a polygon boundary (single click and release), it would ‘grab’ that vertex and allow you to move it. Once you place it by…
1 vote -
Background tasks overall progress visible in ICM
I think waiting for ICM to finish the task without having an idea about when this might be is not productive at all. Tasks like opening a simulation, graph something in the model, running a statistical template should be done accompanied by a loading bar, which will show the overall progress of that task.
9 votes -
no flag update when updating via CSV
In ICM, when only updating a value via CSV file (Network -> Import -> Update from CSV files), the data flag should be left untouched instead of being "blanked" or updated with a new value (based on the "Flag to use for new/updated data" in the 'import from CSV data" screen)
2 votes -
Checking
Can we have a feature to monitor who has Network Soft Licences. Earlier we had the Admin Control center to check.
2 votesWe are currently discussing our licensing technology to see what and where we need to improve. If you have ideas or additional needs – please let us know here.
