Storm Sewer & Flood Modeling
Welcome to the Innovyze Stormwater, Sewer, and Flood modeling feedback page.
24 results found
-
Pause simulations during server restarts
Please could we have an ability to pause simulations whilst an InfoWorks ICM server is restarted?
As part of the wider drive to reduce CSO spills there is an increasing need to run long time series through sewer models. This can require models to simulate for multiple weeks; this isn't compatible with automatic updating on servers, which restarts them to apply updates, which causes any active simulation to fail.
Microsoft Azure for example has a monthly patching cycle and sometimes more frequent for ad-hoc critical security updates. With simulations running for multiple weeks and more InfoWorks users moving to cloud…5 votes -
Slot Width field for 1D conduits
Could the Slot Width field be enabled for Conduit Type "Conduit" and results generated by the application of the numerical correction tool been stored there for greater clarity, thanks.
4 votesThanks for the idea!
The slot width field is used to define the width of the drain when using a 2D conduit. Are you after a field to define preissmann slot?
-
Re-order objects
Can it be possible to re-order objects within an InfoWorks ICM model Group. As objects can get added or superseded over time. So to aid model audits and ease of use, it would be really beneficial to have an option to re-order. Thanks
6 votesThanks for the idea. Have you tried using the different sort options in the tree?
-
Copying view from one network to another
It would be useful to be able to take the view from one open network (X, Y and Zoom level) and apply it quickly to another network - e.g. to do a quick visual comparison between the two networks.
9 votesInteresting idea. Could I ask you to clarify the visual comparison task; e.g What are you comparing?
-
Remove Need to Validate When Changing Background Layers
Suggest that a network not need to validated or show that it was edited (red circle) for only switching on/off a background (e.g., aerial)layer would be appreciated. Keeping scenarios straight is tough enough w/out the additional heart attack when I don’t recall changing anything.
26 votes -
Add calibration criteria
Add in ability to review calibration in the model using calibration criteria such as those contained in the CIWEM COP
1 voteThanks for the great idea. Could you you give an example of how you would see this working in the software?
-
Faster release Exchange license
After a user uses the Exchange license, it takes ages before the license is released again so another user can use it.
4 votes -
Image Import Information: File Types and Sizes
Would like to see the list of accepted file types (SVG, PNG, JPEG, PDF, etc.) , and file size limitations.
1 vote -
Overhaul to the Hyperlinks system to allow attached data to be transportable
ICM and Infoasset databases offer a system that allow hyperlinked documents to be connected to the database. Primarily this to allow survey, as laid and other background data to be available to the user and is a powerful function that if used correctly would allow databases to become much easier / quicker to check, improving quality and confidence. Currently the models are abstract representations of the systems, and to check detail requires arduous library time retracing other people's steps. Having the data bundled with the model is a significant improvement.
However, two practical problems arise, since many different organizations work…
11 votes -
Correct calculation of volume within storage node when using porosity
Currently when a porosity value is applied to a storage node, the porosity is only applied for storage array entries which are below ground level. Storage array entries above ground level are assumed to have a porosity of 100%. Between the highest storage array level value below ground and the lowest storage array level value above ground the porosity is assumed to increase linearly between the value you applied and 100%. i.e. the storage is assumed to be conical.
This should be corrected. The porosity value applied should be applied to the whole storage array both above and below ground.…5 votesCould you provide a practical example of porosity above ground?
-
8 votes
-
Export river cross sections for an ICM model
At present, ICM river cross sections can only be exported to dwg one by one. It would be helpful to be able to export all the modelled cross sections in a single operation (eg via data export centre)
4 votes -
1 vote
Please provide reference for Harris County FCD modifications.
-
Show data errors
Mike + added a function called "show data errors" in its new product in 2021, which can display objects that lack necessary field information and generate a table. This function can improve the ability of model engineers to deal with model errors more quickly. I hope ICM can add this function
2 votes -
I want Long-Sections of a pipe to show the unconnected pipes which cross
On a Long-Section of a pipe, I would like ICM to show the unconnected pipes which cross that long-section. This would illustrate potential pipe clashes.
I imagine the unconnected pipes would be shown as circles on the long-section similar to how connected pipes are currently shown.
8 votesInteresting idea.
We need more information on the problem of pipe clashes. Are these unconnected pipes in the model or are they referencing Asset networks, or Water networks?
How granular of a view does one need? I.e. are you interesting in generally where these crossing occur, or are you trying to identify how close you can cross something else?
-
As a user, I need to burn the 1D river into ground model, so the flooding extent inside the 1D river channel is shown accurately
HEC-RAS has a tool in RAS Mapper doing just that.
https://www.kleinschmidtgroup.com/ras-post/including-channel-bathymetry-into-your-terrain/10 votes -
Speed up interfaces with 2D zones with millions of elements (make it a multicore process)
The interface for large 1D-2D models is very slow. While moving through the geoplan every time it takes about ten seconds to load and show the location. We noticed that in this time only 1 of the 32 CPU is used for 100%. We tried 2 complete different videocards (Quadro K2000 vs Quadro M6000 24GB) but that did not make any difference (both slow). The interface/geoplan works fine when we do not display the 2D zone. We tried lot of things that were suggested by your supportdesk, but it seems like that this is something that will only really improve…
7 votesGathering some example models for the development team to consider.
-
Enhance import/export of SWMM models for ICM platform
Enhance model import from SWMM5 INP files to include a few of the Open Data Import Center /Open Data Export Center options:
• Only update existing records
• Ignore existing objects
• Overwrite, Merge, etc.
• Export Selection only
Ultimately we want to have a central model copy but have the ability to easily push out and in simple EPASWMM INP files for developers and others. When a new SWMM INP file comes back from another modeler, we’d like a good way to update the existing model from that.
It would be great if this applied to both SWMM and…4 votesAs each INP is a set of physical conditions and event data, the Open Data Import Center imports only the physical network objects.
-
In ICM add AutoCAD layers to usertext1 on import
When importing from autocad layer mapping can be used to create a model layout for things like 2D Mesh zones but all created objects are null. I have written an SQL to apply parameters to all null mesh zones and roughness zones and import each layer individually. If the autocad layer was written to usertext1 I could import all at once with a saved layer mapping and then enter all parameters by selecting usertext1
3 votes -
Interpolation of levels
It happens too often that while merging different models, you suddenly need a different timestep for your level-file. The only way to do this now, is remake your level completely. It would be better to (when changing the timestep of your level) ICM would ask what do : automatically interpolate the new in between time steps, put the in between time steps on zero,...
7 votes
