Storm Sewer & Flood Modeling
Welcome to the Innovyze Stormwater, Sewer, and Flood modeling feedback page.
70 results found
-
I would like improvements for ICM with SWMM engine
add ICM SWMM functionalities that are already available in ICM with regular engine
- Area take off
- Population data
- CN/Runoff coeff. lookup
-Create dummy boundaries15 votes -
Cross section result view: keyboard shortcuts to go upstream or downstream
In the cross section result view (showing the water level), in RS there was the possibility to go upstream or downstream with PageUp/PageDwn, in ICM you have to right click to move upstream or downstream
12 votes -
Possibility to turn off report windows
Now, when updating elements from ground model, extending cross sections, inserting an opening in a bridge… a report is displayed. This can be very annoying when building up a model and you have to click the report windows away. It would be useful to have an option to turn off these report windows.
11 votes -
RTC rules: order alphabetically
When copying rules, they appear in seemingly random order. When you have a lot of rules it can be very difficult to have an overview
11 votes -
Include regulator state in graph reports
this can only be done with custom graphs, would be easier in standard graphs for run comparison
11 votes -
Commit history for scenarios
Commit history for scenarios
Show an extra column in the commit history window to indicate how many scenarios exist in this version of the network. Ideally, there would be a button or column through which you can see the names of the scenarios for this network version.12 votes -
Re-order objects
Can it be possible to re-order objects within an InfoWorks ICM model Group. As objects can get added or superseded over time. So to aid model audits and ease of use, it would be really beneficial to have an option to re-order. Thanks
6 votesThanks for the idea. Have you tried using the different sort options in the tree?
-
Ability to snap to DWG or GIS background layers
When moving a manhole, I would like to snap to drawing geometry
6 votes -
Retain decimal places when copying/pasting grid values
For most numerical values in a model, ICM can hold 8 decimal places. From the grid view, if you copy/paste a single cell value, the full set of decimal values are preserved. However, if you copy multiple cell values at once (e.g. an entire column), only the visible/display decimal places will be retained. For certain fields with combinations of large/small values and units, e.g. area values measured in hectares, or baseflow measured in l/s, basic copying/pasting values can result in a lot of precision being lost.
The work-around for this is to use SQLs to copy/paste/move values around, which ensures…
2 votesThanks for the idea. We are happy to hear you have a workaround while we work to continue to improve our tools for our users.
-
Built-in mapping capabilities, like PCSWMM and Civil 3D have
Other software has built-in background mapping capabilities for free, using OpenStreetMaps or Bing satellite/hybrid road maps for georeferenced models. The current capability of supporting WMS servers falls way too short and there are no free options available anymore.
This should have been included ages ago.
4 votes -
Improve database and results files read performance
When opening an ICM network for the first time (i.e. no network files in the local files "Working" folder), the WDS reads through the database file in 4 kB chunks to retrieve the requested version of the network. This read process appears to be limited to a disk "queue depth" of 1 and is therefore very sensitive to drive latency. In a cloud environment, drive latency can be in single digit milliseconds. Therefore, the read process might achieve 400 x 4 kB = 1.6 MB per second. If the database file is large, it can take many minutes for the…
23 votes -
Compare WWG and TWG files
A tool to compare different WWG files and TWG files and report on the differences, similar to the Compare functionality for Networks.
1 voteThanks for the idea!
-
Remove Need to Validate When Changing Background Layers
Suggest that a network not need to validated or show that it was edited (red circle) for only switching on/off a background (e.g., aerial)layer would be appreciated. Keeping scenarios straight is tough enough w/out the additional heart attack when I don’t recall changing anything.
26 votes -
Add Data Sets to InfoWorks
Add Data Sets to InfoWorks as one can do in InfoSWMM. Helpful when clients want to model alternatives scenarios and make last minute changes.
2 votes -
Active/Inactive Network Elements
Ability to activate and inactivate model elements in InfoWorks as one can do in InfoSWMM.
2 votes -
Know which master database refers to a working/results folder
Create a means to know which master database is connected to a working / results folder. i.e. to go from the long name of the working / results folder to the ICM master database. A simple text file within the folder could give the name of the master database and version of ICM,
13 votes -
Scenario assigned 'official' ID numbers within software
I would like for scenario names to be prefixed with a built-in ID number, in the same way that model commits have official version numbers, and wastewater and trade waste profiles have ID numbers. ICM clearly tracks ID numbers behind the scenes, since it is able to keep the scenarios in the same order (rather than sorting them alphabetically or similar).
When specifying exactly which 'model' was used to produce a set of simulation results, it is necessary to specify network ID, version ID and scenario ID - so it would be helpful to be able to just point to…
1 vote -
ICM Template for printing muti-page Geoplan and Long Section views
I can already batch print geoplans and Long Sections by themselves. How to print them together? My current approach is to learn how to manipulate the output PDFs using PDF TK server, ghostscript, and potentially pdfjam, but some of these are new tools for me and I haven't yet made it work. Is there some way to do it using the Print Layout?
Current work in progress:
Batch printing geoplan
Save each spatial extents using Spatial Bookmarks
Set up print layout, then select batch print button from toolbar in the Print Layout
Geoplan showing each bookmark is saved on its…3 votes -
adjustments to a selected set of scenario's
In my opinion it would be very useful if you could make the same adjustments in one stretch for a selected set of scenario's. Similar to an adjustement you make in the base scenario that effects all the underlaying scenario's but than for a specific selection of scenario's. It would be handy to restore an error that occurs in several scenario's (scenario' that are all a copy from the same scenario)
4 votes -
Generate Stats reports as a background task
Generate Stats reports as a background task so User Interface isn't locked - as for simutations and meshing
5 votes
