Storm Sewer & Flood Modeling
Welcome to the Innovyze Stormwater, Sewer, and Flood modeling feedback page.
370 results found
-
2D worst case analysis
I would like to be able to analyse a number of simulations in terms of the worst flood depth per 2D mesh element. An integrated tool (along the lines of the already existing worst case grid output) would avoid the need to mess around in external GIS.
20 votesThank you for this idea addition, it is something we have been considering and building out plans for, if there are more specifics in terms of the exact outputs/comparisons you would like to see, please feel free to add so we can ensure these are captured.
-
Additional storage calculations
Can we please revisit the assumptions in the additional storage routines.
In a world where everyone has access to accurate property location data, via customer seed points and subcatchments can be any shape or size. The distances between properties and sewers can be much more accurately determined in the calculation than is currently the case, based on the existing A/4L.
The calculation also makes no allowance for private inspection chambers, which in many instances would provide more volume than the pipe.
Two versions of the equation driven by a new field in the subcatchment would also be better allowing lateral…
1 vote -
Change coordinate system of a model more easily
We have a large project running for several years and our design team is working in one coordinate frame. Our clients models are all in another coordinate frame. Our team would like to reproject the models into the design coordinate frame but there is no easy way of doing this. Currently, we are exporting the models to TAB files (table by table) and importing them again after changing the coordinate system. This is time consuming and introduces a lot of potential for human error. There is also no way to (I know of) to maintain all the scenarios so we…
6 votes -
Export river cross sections for an ICM model
At present, ICM river cross sections can only be exported to dwg one by one. It would be helpful to be able to export all the modelled cross sections in a single operation (eg via data export centre)
4 votes -
Export Max Flood Contours - Elevation
It would add value to ICM if users could export the Maximum Flood Contours as Elevations in the same way that we can for Depth. This would be particularly useful as currently Depth is the only property that be be exported as an ASCII Grid file.
It appears that the contour intervals used in the export is taken from the "Flood" theme. Perhaps under "Map Type" there could be options to add "Flood Elevation - Filled/Show Layers/Transparent/etc" and hence with a Flood Elevation map type chosen the Max Flood Contours could be exported as elevations.
10 votes -
Show worst case analysis on long sections
I would like to be able to see the worst case across multiple simulations (highest water levels) along the 1d network when reviewing results. Essentially being able to visualize statistical report results in a long section.
7 votes -
Long-sections: Centre Geoplan on the selected link
It would be handy if the Geoplan centred on the selected link when selecting a long section. It seems every time select a long-section the windows split into two halves, one for the geoplan, the other for the long-section. As a result the link I just selected is seldom visible in the geoplan frame, meaning I have to manually re-center the geoplan before I can carry on selecting links for the long section.
8 votes -
Implement the Nash-Sutcliffe coefficient to evaluate the quality of the calibration
Developp this tool would help the customer to analyze their calibration and justify the used coefficients.
8 votes -
1 vote
Please provide reference for Harris County FCD modifications.
-
Call the 'Total storage calculation' function from a ruby script and write the output into a csv-file
It would be a great feature to call the 'Total storage calculation' function from a ruby script and write the output into a csv-file.
If it is not possible to call the build-In function from ruby, it would also help to call the 'storage calculation function' from InfoWorks ICM UI for a set of nodes (maybe from a selection list) and write the output directly to csv-file(s).
2 votes -
Better performance and functionalities of the recycle bin
In a workgroup database, the Recycle Bin today is more a nuisance than a useful feature. When there are too many items in it, it can delay the connection to the database considerably or even make it impossible to connect. The functionalities for selectively restoring or removing items are also very poor. E.g. you cannot select on the user who deleted items, or find the original path in the database where items were deleted from. The only real use is when you accidentally delete something and restore it immediately, but then maybe a personalised recycle bin which only exists during…
10 votes -
Would like MSI installer licensing option flags
As an IT admin, I would like to install XPSWMM/XPSTORM using the MSI installer with flags to set the licensing options, so that I can automate the installation.
1 vote -
I want to be able to open a layer list using Exchange (Ruby)
As part of a ruby script, I would like to add a specific layer list to a network to enable a Spatial SQL to be run. This script needs to be run on all our networks as part of a regular update. We have 1100 models which would require an extensive manual activity.
There is an existing method "WSOpenNetwork.openmolayer_list" but this i sonly available internally to Innovyze. Could you please make it available to all?
3 votes -
bottom opening
Beside an upstanding vertical orrifice, it would be practical to be able to implement horizontal 'bottom holes' from one node to an underlaying node. e.g when a ditch can drain to an underlying conduit by means of a bottom opening. This might be a more straight forward implementation then the weir circumference workround method which is now often used. if possible both circular and rectangular.
16 votes -
Add sub-grid sampling functionality to the ICM 2D engine
And sub-grid sampling visualizations, please :)
2 votes -
Selection List Subtraction
I was looking for a way to subtract one selection list from another. In other words, we would like to remove overlaps between selection sets but it seems there is no way to do that easily in ICM.
It is highly recommended to include this feature for future versions as competitors such as Bentley SewerGEMS have already had this for years now.
2 votes -
1 vote
-
Model results as TVD connectors
We'd like to have model results as an input in the TVD connectors. An example is where we have observed flows that we would like to use at a tributary and then switch to catchment flows when the observations run out. We know this can be done using a set up of sluices and dummy objects but it would be a lot more elegant to simply have the subcatchment as Input B. I'm sure there are plenty of other examples of where using model results as an input would be useful.
19 votes -
Consistent SHP Export Data Fields for 2D mesh elements in ICM
A simulation result can be exported to SHP files by right clicking the icon and choosing the Export menu. When the result is exported for a specific timestamp, some underlying data fields are not exported such as the elevation and area of a 2D element. When we need such data fields, the maximum state should be exported.
We wanted to investigate the ground levels of 2D meshes in my model, and were a bit confused to find the data was not included, as the export was done for the peak of a rainfall. Contacting the support team, we learned that…3 votes -
Attach Model documentation to Db
be able to attach documents, model user guide, MBV etc so key documentation in one place. Similar to InfoAsset
1 voteI think this is a duplicate idea.
