Storm Sewer & Flood Modeling
Welcome to the Innovyze Stormwater, Sewer, and Flood modeling feedback page.
370 results found
-
Support for multiple screens
Would like to be able to work across multiple screens - plan view on one screen and long section/grid/graph on another.
84 votes -
Validation as a background task
Validation as a background task so UI isn't locked.
37 votesWe have spent quite a bit of time investigating how validation improvements might be achieved, whether that be through validation as a background task or whether it be with improvements on the speed of validation in the first place.
There is no silver bullet which has been identified so far, the validation is already very efficient with minimal potential for speed improvements and there are issues with it as a background task as previously mentioned which we haven’t got fully fledged solutions to yet.
-
Partially complete a simulation and review results and then opt to continue the simulation
Simulations often take a long time to run. I would like to be able to "pause" the simulation and review the results to check that the initialisation is correct, or that an RTC is working properly, and if I am happy then continue the simulation to completion.
34 votesThe approach which we are looking to leverage here is one which deviates a little from the original request but gives the same ability to interrogate results part way through a simulation. After investigating options, the best appears to be to have a run for the total duration you are interested in, then set a state saving checkbox in the run and when you wish to interrogate simulation results stop the simulation. We will then make use of ICMLive developed concatenation of results to allow us to tie in the “continuation run” with the results which were stopped earlier. There is a lot more detail to this than I can add here, but it should meet the need.
-
29 votes
-
Additional keyboard shortcuts
Keyboard shortcuts can really help speed up processes and workflows in InfoWorks ICM but some of the menu options do not yet have these. Would it be possible to add the missing keyboard shortcuts, specifically for repeatable tasks such as updating objects from ground models?
29 votes -
Have all the functionality available in the 'Manage scenarios' dialogue in the ICM, to also be available via ICM Exchange
Options such as 'Reintegrate' & Duplicate'
28 votes -
Set up runs more efficiently
Is there a matrix type tool in ICM that allows you to easily set up complicated run set ups? i.e. for this 1 Model Network, these runs with use these rainfall files, inflow files, WWG, etc are needed.
Model Name
Base ModelRainfall Inflow WWG Tradeflows
M5-30 Inf-M5-30 WWG1 Trade1
M5-240 Inf-M5-240 WWG1 Trade1
M5-960 Inf-M5-960 WWG1 Trade1
M10-30 Inf-M10-30 WWG1 Trade1
M10-240 Inf-M10-240 WWG1 Trade1
M10-960Inf-M10-960 WWG1 Trade1With same timesteps and 2D parameters?
28 votes -
RTC rule themes
It would be great if it was possible to theme in the GeoPlan on the basis of the rules which are active for a given object at the visible timestep.
27 votes -
Save toolbar and screen configurations and locations
I run InfoWorks on my laptop, and have an external monitor. I find I'm often searching for toolbar buttons because switching between the two monitors of different sizes re-configures the locations of the various toolbars and screens.
For example, on my external monitor there is enough room to have the User Actions toolbar displaying, but my laptop is smaller and there is no longer enough room for it, so instead of two rows it bumps down to three and moves my toolbars all around. Adding in profiles or even a scrollable space for the toolbars so the ones to the…
27 votes -
Remove Need to Validate When Changing Background Layers
Suggest that a network not need to validated or show that it was edited (red circle) for only switching on/off a background (e.g., aerial)layer would be appreciated. Keeping scenarios straight is tough enough w/out the additional heart attack when I don’t recall changing anything.
26 votes -
26 votes
-
Adjust mesh locally without remeshing all
Adjust mesh locally without having to remesh the entire 2D zone.
26 votesWe are looking into this, but for the majority of cases it might be that there is already a significant improvement related to this with the new “Clip meshing” which was released with version 11.0 of the software, but in a prototype state, please ensure outputs are reviewed before use. The reason it provides an improvement is that it does a coarse mesh first (which is likely to remain unchanged if only small amendments are made) and follows this with a more detailed mesh after. It would be great to get any feedback you might have on your experiences with the Clip meshing and consistency of results.
-
Integrate a Template option for setting out run group in Infoworks ICM
I am working on project which includes 50 models. where we have to give runs for different return periods and durations for each model. It is a time taking process, which unnecessarily create chances of error by creating run setup every time. is it possible to include a run set up template, which can be changed as per the user requirement and saved for the further use.?
25 votes -
Support for more than two simulations in long sections
When evaluating the effects of raising and lowering roughness it would be helpful to display three or more simulations in the same long section; at the moment it is only possible to display 2.
25 votes -
Inverse Distance Weightage in ICM
We have Thiessen in ICM. It will be great if we have IDW like what we have in RS.
25 votes -
As a user I want to be able to adjust dry weather flow diurnal profiles easily to account for day light savings
Diurnal wastewater and tradewaste profiles shift over the course of the year due to day light saving time adjustments. I would like to see ICM include the ability to phase shift the diurnal patterns to account for DLS. I believe this adjustment would be best placed in the "monthly calibration" tab where in addition to the scaling "factor' there is also a time adjustment factor
24 votes -
Use ruby to edit rainfall dialogue box
Exporting rainfall files to csv for manipulation creates details of the storm events themselves, we would like to be able to change the return periods, durations, multiplying factors shown in the rainfall dialogue editor instead.
24 votes -
RDII Analyst (in ICM)
Provide RDII Analyst without needing to purchase InfoSWMM
24 votes -
Improve database and results files read performance
When opening an ICM network for the first time (i.e. no network files in the local files "Working" folder), the WDS reads through the database file in 4 kB chunks to retrieve the requested version of the network. This read process appears to be limited to a disk "queue depth" of 1 and is therefore very sensitive to drive latency. In a cloud environment, drive latency can be in single digit milliseconds. Therefore, the read process might achieve 400 x 4 kB = 1.6 MB per second. If the database file is large, it can take many minutes for the…
23 votes -
Statistic Report Batch Processing
As a use the ability to 'schedule' statistical reports would be extremely useful. currently if i'm generating a spill report on several overflows for a 10yr TSR series this can take several hours. The process effectively locks the software and prevents any other operation from been undertaken. This is highly inefficient and costly especially when optioneering if several iterations are needed. Shorter TSR's can be run in this case however even a year with several CSO's can take 20-30mins.
23 votes
