Storm Sewer & Flood Modeling
Welcome to the Innovyze Stormwater, Sewer, and Flood modeling feedback page.
370 results found
-
Show individual vertex points in the geoplan at all zooms
Vertices are only shown in the geoplan when zoomed in. It would be useful to see these at all zoom levels for cross sections and bank lines.
15 votes -
I would like improvements for ICM with SWMM engine
add ICM SWMM functionalities that are already available in ICM with regular engine
- Area take off
- Population data
- CN/Runoff coeff. lookup
-Create dummy boundaries15 votes -
Simulation engine control update
Since the beginning of ICM and allowing to send simulation to other computers in the network, there was a need for knowing exactly who is currently sending simulations and to which computer. Please update the ICM with this improved functionality for the normal user, not for admin only. These people are the ones who send simulation to the network, not IT people!
15 votesThank you for the addition of this request, we are in discussions about how this might be achieved as the level of awareness of tasks is varied between agents. Would a dashboard showing who sent which simulation where (which are still ongoing) be sufficient? This would be without the progress those simulations have already made available as a first step.
-
Zoom graphs on either axis
Many software suites allow the option to zoom in on both y and x axes on their graphs. However, ICM only allows zooming on the x-axis which often takes away the ability to see trends for lower or higher conditions. I am aware that it is possible to change the y-axis range in properties, but that is not desired since it requires changing the range numerous times as you pan through the data. This is a major caveat which sometimes changes our choice of modeling software, especially for systems which require heavy calibration and data visualization.
14 votes -
I would like to be-able to reorder scenarios in the drop down in ICM
II would like to be able to change order of scenarios (after Base). So be able to move up scenarios or down scenarios in the drop down list. I often have to delete scenarios or created amended versions of copied scenarios and this often results in a pretty messed up list of scenarios
14 votes -
Time varying roughness values for rivers
As vegetation changes throughout the seasons, it would be great if we could also have time varying roughness patterns for river reaches.
14 votes -
Customization of Grid Windows in InfoWorks ICM
Allow custom grid window layouts in InfoWorks ICM, much like the Property window. Allow the user to reorganize the columns, change the column widths, or hide unnecessary columns, and save it as a layout to be applied as a default.
14 votes -
Conveyance on cross section lines
Provide cross section conveyance for each cross section
14 votes -
Bank line ground model update from within properties view
Make update from ground model possible from within properties view (as is already possible for cross sections)
13 votes -
Know which master database refers to a working/results folder
Create a means to know which master database is connected to a working / results folder. i.e. to go from the long name of the working / results folder to the ICM master database. A simple text file within the folder could give the name of the master database and version of ICM,
13 votes -
Incorporate ARR2019 Initial Loss & Continuing Loss (IL/CL) infilitration type for 2D Infiltration surfaces
ICM currently allows 4 infiltration types in 2D infiltration types:
-fixed
-Horton
-Constinf
-GreenAmptAustralian Rainfall and Runoff 2019 talks default initial loss and continuing loss parameters for rural catchments, values for which which can be found in the BOM data hub.
A new 2D infiltration type which allows the simple IL/CL would allow 2D modelling more inline with ARR2019.
13 votes -
Cross section result view: keyboard shortcuts to go upstream or downstream
In the cross section result view (showing the water level), in RS there was the possibility to go upstream or downstream with PageUp/PageDwn, in ICM you have to right click to move upstream or downstream
12 votes -
Give a warning when copying between networks with different user defined defaults
when copying for example conduits between networks with flags #D for headloss and roughness, the values are adapted to the user defined values in the new network. This can be confusing.
12 votes -
Commit history for scenarios
Commit history for scenarios
Show an extra column in the commit history window to indicate how many scenarios exist in this version of the network. Ideally, there would be a button or column through which you can see the names of the scenarios for this network version.12 votes -
blockage
Applying pipe blockage is a standard required in Australia and the functionality in ICM to do this is not user friendly (using blockage links). A simple % pipe blockage in the conduit properties should really be an option. This is particular the case for cross drainage and also orifice and pipes leaving detention basins (where a pit isnt used)
12 votes -
Pruning does not sub reassign drainage links correctly
When pruning, subcatchment drainage manholes are reassigned to the first modeled downstream manhole. However, when pruning subcatchments that drain to single or multiple links, ICM gives incorrect results in some cases and doesn't work at all in other cases, which then causes validation errors after pruning. I submitted this as a bug since it gives incorrect results, but Innovyze asked me to submit is as a "feature request". So please vote for this so it can be fixed and work correctly.
12 votes -
Sub catchment Ground Slope
Currently ICM isn't equipped with the tools to calculate the slope from an underlying ground model or 2D zone so this will need to be determined outside of the program. Can you include the ability for the program to calculate an average catchment slope based on the 2D mesh data or ground model within each sub catchment as an option if this has not been done outside of ICM?
12 votes -
Import selection lists from CSV
A simple request - can we have the ability to create csv files of selection lists that could then be imported into ICM?
12 votes -
Bank marker distinctions
It would be good if cross sections for rivers could be marked with left and right bank markers within the cross sections themselves.
12 votes -
Export run results to csv: timestep options
When exporting run results to csv, it would be useful to select a timeframe you wish to export (excluding for instance the initial conditions that haven't settled into a level that makes sense). Also exporting at a different timestep than the one your run uses, would be nice. These features could maybe be added to the replay options dialog?
11 votes
