Storm Sewer & Flood Modeling
Welcome to the Innovyze Stormwater, Sewer, and Flood modeling feedback page.
370 results found
-
Infoworks ICM- Sewage Temperature Modelling and Heat Losses
The following features should be added to Infoworks ICM for modelling temperature impacts for Heat extraction or heat insertion projects:
- Sewage temperature to be added in WWG file as a pollutograph parameter and can also be defined in a diurnal pattern to consider trade temperature profiles
- I&I temperatures can be extra entered
- Linear heat losses can be defined for standard pipe configurations towards an equilibrium temperature
- Temperature mixing at each node, based on WQ simulation engine
- Heat extraction or insertion possible at any model node10 votes -
As a user, I need to burn the 1D river into ground model, so the flooding extent inside the 1D river channel is shown accurately
HEC-RAS has a tool in RAS Mapper doing just that.
https://www.kleinschmidtgroup.com/ras-post/including-channel-bathymetry-into-your-terrain/10 votes -
Infoworks - Pipe grade calculator
Pipe grade calculator between US and DS inverts, Ultimately having the ability to calculate downstream or upstream inverts over a long network based on a specified grade from either a DS or US invert level as a starting point.
10 votes -
Themes for long sections
It would be great if results could be displayed in the coordinates panel for a cursor which is hovered over a long section with results.
10 votes -
River reach theming
It would be great if a river reach could be themed individually across the left and right banks and if theming were more flexible for storage areas too.
10 votes -
Can ICM add particle tracking module?
When there are pollutants that enter a system from various sources then it would be good to have pollutant tracing functionality which shows the source and the pollutant moving through the system, giving an idea of the rate at which it travels and impacts areas downstream.
10 votes -
Copying view from one network to another
It would be useful to be able to take the view from one open network (X, Y and Zoom level) and apply it quickly to another network - e.g. to do a quick visual comparison between the two networks.
9 votesInteresting idea. Could I ask you to clarify the visual comparison task; e.g What are you comparing?
-
Merge pond and storage nodes and increase their functionality
Pond nodes:
- allow variable infiltration at different levels (up to 3 different rates)
- allow variable perimeter with level i.e. plan area through which side infiltration can occurs can vary
- no porosity functionStorage nodes:
- 1 porosity value (which only works below ground, above ground it is assumed to be 100%)
- fixed perimeter for infiltration i.e. assumes cylindrical shape for infiltration (despite the plan area changing with level)
- fixed infiltration rate (no change with height)It is not possible to model both porosity and a change in infiltration with height.
I propose that pond and…
9 votes -
Add a result grid window for cross sections
Currently there is not a grid results window to show all cross sections. Would be helpful to have one. Also would be good if the grid window can show geometric elements of each cross section, such as bank levels, flow area, wetted perimeter, hydraulic radius, critical depth, etc.
9 votes -
Using SWMM5 treatment equations at a node or link in ICM Networks
Users would like to use SWMM5 Buildup Washoff in ICM Networks AND the SWMM5 treatment equations at a node or link in the ICM St Venant solution.
ICM SWMM networks have both options but for the purposes of using the powerful routing solution in ICM - It would be good to have at least a treatment feature at node/link even as a simple percentage pollutant removal LID/SuDS do have this simple BMP water quality removal.
9 votes -
Add 2D result labels for ICM mesh elements
I would like to display the 2D results (depth, elevation, velocity) at each individual GRID cell using labels.
This is currently available in XPSWMM, so I would like the same functionality in InfoWorks ICM as I would rather not have to export the data to GIS.9 votes -
Sim Slots
There should be an option to select to limit sim slots to be used by a model so other models dont go in waiting when running sims simulataneously .
9 votesHello there,
If my understanding of the request is correct then I believe that this capability does already exist in the agent options. If you are able to start the InfoWorks ICM agent manager, then here it is possible to set a maximum number of concurrent simulations which can be active at any one time.
Thanks,
Pascal -
UNDO Button
We all make mistakes!
9 votes -
Support for Hong Kong Observatory Rainfall Data
The Hong Kong Observatory is the authority responsible for producing observed and forecast rainfall data for the territory. Their data is produced in a format not currently supported in ICMLive so we have to convert it into shape files to be used. Direct reading of this data would enable both more efficient data loading processes as well as reducing the potential for errors.
9 votes -
Pipe collision check
Client feedback: an automatic check for colliding pipes would be highly appreciated to avoid nightmares in the construction.
9 votes -
Removing missing GIS-layers
If a GIS-layer for a model is missing you cannot remove the reference to it because the layer isn't visible in the GIS layer control window. So you keep getting the error message each time you open the model. Why not make missing GIS-layers visible in the GIS layer control window ('greyed out' or with a suffix '(missing)' in the description). Then you can select it and remove it.
9 votes -
Background tasks overall progress visible in ICM
I think waiting for ICM to finish the task without having an idea about when this might be is not productive at all. Tasks like opening a simulation, graph something in the model, running a statistical template should be done accompanied by a loading bar, which will show the overall progress of that task.
9 votes -
Multiple river section results
It would be great if multiple river sections could be selected and if it was then possible to produce multiple object graphs from these and by extension do exports.
9 votes -
Rating curves / equations as downstream boundaries
At the moment we can use 'user control' links to act upstream of the DS boundary. These links have head/flow/power as their inputs. It would be useful to have a dedicated object that could be either a look up table of levels (rather than heads) and discharges, or an equation that would define the level / discharge relationship. Note that if an equation option were selected then it would need to be multi-part to allow for a changing relationship as water goes out of bank.
9 votes -
Please provide Intellisense to the SQL Editor in ICM
I want the SQL Editor to help me write SQL queries by color coding and autocompleting data, similar to Intellisence.
9 votes
