Storm Sewer & Flood Modeling
Welcome to the Innovyze Stormwater, Sewer, and Flood modeling feedback page.
370 results found
-
River reach theming
It would be great if a river reach could be themed individually across the left and right banks and if theming were more flexible for storage areas too.
10 votes -
Customization of Grid Windows in InfoWorks ICM
Allow custom grid window layouts in InfoWorks ICM, much like the Property window. Allow the user to reorganize the columns, change the column widths, or hide unnecessary columns, and save it as a layout to be applied as a default.
14 votes -
Adjust mesh locally without remeshing all
Adjust mesh locally without having to remesh the entire 2D zone.
26 votesWe are looking into this, but for the majority of cases it might be that there is already a significant improvement related to this with the new “Clip meshing” which was released with version 11.0 of the software, but in a prototype state, please ensure outputs are reviewed before use. The reason it provides an improvement is that it does a coarse mesh first (which is likely to remain unchanged if only small amendments are made) and follows this with a more detailed mesh after. It would be great to get any feedback you might have on your experiences with the Clip meshing and consistency of results.
-
Multiple river section results
It would be great if multiple river sections could be selected and if it was then possible to produce multiple object graphs from these and by extension do exports.
9 votes -
RDII Analyst (in ICM)
Provide RDII Analyst without needing to purchase InfoSWMM
24 votes -
Interconnect 2 longprofiles
When 2 sim results are placed on 1 long profile (with the Open as alternate result option) only the water heights are used to visualize sim2. Sometimes these pipes have different invert levels which makes a comparison on 1 long profile rather useless. The alternative is to open 2 long profiles (one with sim1 and one with sim2) but playing through a simulation requires doing it step by step. Could a possibility be added to link the 2 long profiles so when Play is selected from the toobar, both simulation are played as the sims were on the same long…
1 vote -
One more File name format for ASCII Grid (forecast) in Spatial TSDB
Now the file name format like *YYYYMMDDHHhhhmm of ASCII grid (forecast) can be supported in Spatial TSDB. However, if the user has a forecast origin accurate to minute, it cannot be used. A new file name format of *YYYYMMDDHHMMhhhmm should be included.
2 votes -
4 votes
-
On behave of Chinese users, could developing team transfer drainage design module from infoSwmm into ICM?
On behave of Chinese users, could developing team transfer drainage design module from infoSwmm into ICM?
Clients in China do have this wish to do drainage and model in same software. Many of our potential client choose Hongye (a simple drainage modelling software) instead of ICM only because Hongye could do pipe design work.2 votesThanks for raising this request on User Voice. For the drainage design requirements across the globe at a localised scale we have InfoDrainage, when looking to take a design which has been produced and to then understand the more holistic catchment wide impact of such a design, this is where the model can be imported into InfoWorks ICM for integration. It is probably worth exploring this in more detail in this instance to understand exactly what the end goal the client is after and at what scale the work is being completed if that would be possible.
-
TVD connector input fields longer than 64 characters
The "input" fields for TVD connectors are currently limited to 64 characters. I have TSDB streams with names longer than 64 characters, and I would like to be able to use those streams as inputs to the TVD connectors.
1 vote -
Auto themes
When themes are set and the upper and lower values for a set of themes have been defined, the auto themes button starts with the non linear interpolation between the minimum and maximum value, it would be great if this interpolation could initially be done linearly and if the other options came secondary to this.
8 votes -
Bridge section data updates
When a bridge section is changed then there are repeatable tasks for entering openings again, if this workflow could be improved that would be great.
8 votes -
Flow Survey importer
It would be good to update the flow survey object and importer, giving this a more updated feel and removing some of the steps.
19 votes -
AutoCAD DWG Background
As a user, I would like to have AutoCAD drawing files as a part of my map control (InfraWorks ICM background) so I can see my AutoCAD Civil 3D design.
21 votes -
Post processing scripts as part of a live simulation
We need to be able to automatically run scripts at the completion of our forecasts. it would be extremely helpful if we could have these scripts as part of the manifest workflow so that they started as soon as the results export task completed.
11 votes -
Inserting channels into topography
Being able to insert channels into terrain rather than editing in 12D or other software would be more practical for smaller firms to turn around modelling ideas.
Landscape packages allow terrain meshes to be manipulated with tools that sink into mesh easily. Channels and swales need slope, not simply vertical depression to model correctly. XPStorm allows 1D modelling but this isn't useful for presentations and Civil 3d and 12d are catching up quickly now that rational method is being phased out.
3 votes -
Simulation engine control update
Since the beginning of ICM and allowing to send simulation to other computers in the network, there was a need for knowing exactly who is currently sending simulations and to which computer. Please update the ICM with this improved functionality for the normal user, not for admin only. These people are the ones who send simulation to the network, not IT people!
15 votesThank you for the addition of this request, we are in discussions about how this might be achieved as the level of awareness of tasks is varied between agents. Would a dashboard showing who sent which simulation where (which are still ongoing) be sufficient? This would be without the progress those simulations have already made available as a first step.
-
4 votes
-
As a user, I would like to be able to export node max stage for all different global storms when exporting to GIS in XPSWMM.
When exporting results to GIS, it should export all the storms that are selected, so that I don't need to manually extract the information and piece them together.
2 votes -
leave Layers and Themes window open
Could you make it possible to work in the Geoplan without having to close the Layers and Themes window? It would make switching Layers on and off much easier. Alternatively you could add a separate window to switch layers on and off.
7 votes
